Usb Setup - Oce VarioLink 3050cp User Manual

ITEM
Ack / Busy
Timing
I-prime
Offline
Receive

USB Setup

This menu controls the operation of the printer's USB data
interface.
ITEM SETTINGS
Usb Enable /
Disable
Speed 12 / 480
Mbps
Soft Enable /
Reset Disable
Offline Enable /
Receive Disable
Serial Enable /
Number Disable
When you have changed any settings in the USB MENU, turn the
printer OFF, then ON again.
54
SETTINGS
Ack In Busy
/
Ack While
Busy
Disable/
3µsec/50µsec
Enable /
Disable
EXPLANATION
ENABLES / DISABLES the USB port.
Selects the interface speed. After setting
change the menu, the
printer restarts on exit.
Enables or disables the SOFT RESET command.
OFFLINE RECEIVE.
Specifies whether to ENABLE or DISABLE a USB
serial number.
The USB serial number is used to identify the
USB device connected to your PC.
– VarioLink 3550cp Series User's Guide
EXPLANATION
Sets the order to output the BUSY and
ACK signal for compatible reception.
Sets time to enable/disable I-prime signal
To Enable/disable of this function. When
set to Enable, the interface retains a
receive possible state even when switching
to Offline. Interface sends the BUSY signal
only when the receive buffer is full or a
service call occurs.