Table of Contents
Advertisement
ITEM
Network
FTP
Setup
(cont.)
SNMP
Network
Scale
Hub Link
Setting
Factory
Defaults?
35
SETTINGS
Enable
Disable
Enable
Disable
Normal
Small
Auto
Negotiate
100Base-TX
Full
100Base-TX
Half
10Base-T Full
10Base-T Half
Execute
– VarioLink 3550cp Series User's Guide
EXPLANATION
Sets Enable/Disable of FTP.
Enable: FTP is available.
Disable: FTP is not available.
TCP/IP should be enabled.
Sets Enable/Disable of SNMP.
Enable: SNMP is available.
Disable: SNMP is not available.
TCP/IP or NetWare should be
enabled.
When Normal is selected, the
network can work effectively
even when it is connected to a
HUB that has a spanning tree
feature. However, printer start
up time gets longer when
computers are connected with
two or three small LANs.
When Small is selected,
computers can cover from two
or three small LANs to a large
LAN, but may not work
effectively when the network is
connected to a HUB with a
spanning tree feature.
Sets a method to link to a HUB.
When Auto is set, a connection
method to a HUB is selected
automatically.
Specifies whether to initialize
the network factory default
settings for the Network.
Advertisement
Table of Contents
