Table of Contents
Advertisement
ITEM
PCL
Pen Width
Setup
Adjust
(cont.)
)
Tray 2 ID#
Tray 3 ID#
MPTray
ID#
IBM PPR
Character
Setup
Pitch
Font
Condense
Character
Set
42
SETTINGS
On/Off
1 ~ 5 ~ 59
1 ~ 20 ~ 59
1 ~ 4 ~ 59
10 CPI
12 CPI
17 CPI
20 CPI
Proportional
12CPI to
20CPI
12CPI to 12CPI
SET-2
SET-1
– VarioLink 3550cp Series User's Guide
EXPLANATION
When minimum width is
specified in PCL, sometimes a
1-dot line, looks broken.
With PEN WIDTH Adjust set to
ON, when the minimum width is
specified, the line width will be
emphasized so as to look wider
than a 1-dot line.
With PEN WIDTH Adjust set to
OFF, the line will appear as
before.
Sets the # to specify Tray 2 for
the paper feed destination
command (ESC&l#H) in PCL5e
emulation.
(Displayed only if Tray 2 is
installed).
Sets the # to specify Tray 3 for
the paper feed destination
command (ESC&l#H) in PCL5e
emulation.
(Displayed only if Tray 3 is
installed).
Sets the # to specify the MP
tray for the paper feed
destination command
(ESC&l#H) in PCL5e emulation.
Specifies character pitch in IBM
PPR emulation.
Specifies 12CPI pitch for
Condense Mode.
Sets a character set.
Advertisement
Table of Contents
