Calibration - Oce VarioLink 3050cp User Manual

Calibration

ITEM
Auto Density
Adjust
Density
Adjust
Registration
Print Tuning
Pattern
50
– VarioLink 3550cp Series User's Guide
SETTI EXPLANATION
NGS
On/Off Enables/disables automatic
density adjustment.
Execute If Execute is selected, the
printer will immediately adjust
density and reflect it in TRC
compensation.
This adjustment must be
executed when the printer is
idling. It can become invalid
if executed in any other
state.
Execute When this menu is selected, the
printer performs AutoAdjust
Registration.
This adjustment must be
executed when the printer is
idling.
Execute Prints the pattern for the user
to adjust TRC. Ordinarily, this
function is not needed because
TRC is automatically adjusted to
the recommended levels
through density adjustment and
TRC compensation.
Adjustment results will be
reflected as offset values
(addition) to the corrections
through the Adjust Density/TRC
Compensation function.