Maintenance and cleaning
Your record player requires little or no regular maintenance. Remove dust with the supplied antistatic cloth.
It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching.
Always disconnect the record player from the mains power supply as a precaution before maintenance!
Useful tips
The base and the record player should be positioned on a low-resonance surface such as wood or multiple
layer ply board to avoid structural vibrations disturbing replay.
Technical specifications PRO-JECT Xtension
* Electronic speed change
Speed variance
Wow and flutter
Signal to noise
Power consumption
Outboard power supply
Dimensions (W x H x D)
Weight
Technical specifications Ortofon RS-212D and Ortofon RS-309D
Tonearm
Supplied counterweight
Downforce range
Effective tonearm length
Overhang
Offset abgle
Tonearm cable length
Weight
Technical specifications Ortofon AS-212S and Ortofon AS-309S
Tonearm
Supplied counterweight
Optional counterweights
Downforce range
Effective tonearm length
Overhang
Offset abgle
Tonearm cable length
Weight
© Audio Trade GmbH · Pro-Ject
* 33,33/* 45,11 and 78 r.p.m.
±0,09 %
±0,01 %
-73dB
2W
16V/1.000mA AC, suitable for your country's mains supply
550 x 250 x 450mm, dust cover open 550 x 550 x 560mm
20kg
medium mass
cartridge weight 18 - 40g (including headshell)
0 - 50mN
RS-212D - 229mm / RS-309D - 326mm
15mm
RS-212D - 22 Grad / RS-309D - 19 Grad
approx. 120cm
RS-212D - 655g / RS-309D - 725g
(plus headshell and cartridge)
medium mass
cartridge weight 18 - 25g (including headshell)
cartridge weight 26 - 38g (including headshell)
AS-212S - weight C / AS-309S - weight D
0 - 50mN
AS-212S - 229mm / AS-309S - 326mm
15mm
AS-212S - 22 Grad / AS-309S - 19 Grad
approx. 120cm
AS-212S - 483g / AS-309S - 535g
(plus headshell and cartridge)
Xtension/
Ortofon tonearms · Revision 30.1.08/1.3.09
7
Need help?
Do you have a question about the Pro-Ject Xtension and is the answer not in the manual?