Advanced Menu - TYAN Tempest i5400PW User Manual

3.3 Advanced Menu

This section facilitates configuring advanced BIOS options for your system.
Main
Installed O/S:
Reset Configuration Data:
Large Disk Access Mode:
Rout Port 80h cycles to
Option ROM Placement
Advanced Chipset Control

 Advanced Processor Options
 I/O Device Configuration
DMI Event Logging

 Hardware Monitor
Console Redirection

Watchdog Timer:
Count:
F1 Help
← →
Esc Exit
Installed OS
Select the operating system installed on the PC.
Note: An incorrect setting can cause the operating system to behave unpredictably.
Options: Win OS / Other
Reset Configuration Data
If you install a new piece of hardware or modify your computer's hardware
configuration, the BIOS will automatically detect the changes and reconfigure the
ESCD (Extended System Configuration Data). Therefore, there is usually no need
to manually force the BIOS to reconfigure the ESCD.
Select [Yes] if you want to clear the ESCD area.
Options: Yes / No
Large Disk Access Mode
This option determines whether a hard drive with more than 1024 cylinders, more
than 16 heads and or more than 64 tracks per sector is present on the system. Set
this option to DOS if such a hard drive is present. Else, set this option to Other.
Virtually, all modern hard disks have these characters so leave this option at DOS,
unless you know otherwise.
Options: DOS / Other
PhoenixBIOS Setup Utility
Advanced
↑↓
Select Item
Select Menu
http://www.tyan.com
Security Power
[Win OS]
[No]
[DOS]
[LPC]
[Disabled]
[Disabled]
[1]
-/+ Change Values
 Sub-Menu
Enter Select
46
Boot Exit
Item Specific Help
Select the operating
system installed on your
system which you will
use most commonly.
Note: An incorrect
setting can cause some
operating systems to
display unexpected
behavior.
F9 Setup Defaults
F10 Previous Values