Groups And Commands; General; Linecard - Qlogic SilverStorm 9000 Reference Manual

3 – Virtual I/O Command Line Interface

Groups and Commands

Type the appropriate password and press Enter. The system responds with:
Welcome to the <SWITCH> CLI. Type 'list' for the list of
commands.
4. At the system prompt enter the following command::
rlogin <slot#>
where <slot#> corresponds to the switch slot where the VIO card resides. The
system responds with:
Welcome to the
Groups and Commands
The following section lists the CLI's functional groups along with the commands for
each group. For more specific information for each functional group, the user would
execute the help <GROUP NAME> command. For more specific command
information, the user would execute the help <COMMAND NAME> command.
NOTE:

General

NOTE:

Linecard

cardInfo
Shows Linecard Information.
Syntax:
cardInfo
Options:
None.
3-4
Administrator access: adminpass
CLI. Type 'list' for the list of commands..
This section lists all known CLI commands. The CLI commands for a
particular product may vary.
For detailed information on commands for the General group, refer
to "General" on page 2-5.
S
D000025-002 Rev. A