CSS1 - Spotlight compressor (08-0540-2).book Page 3 Thursday, June 17, 2010 10:26 AM INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
CSS1 - Spotlight compressor (08-0540-2).book Page 4 Thursday, June 17, 2010 10:26 AM GENERAL SAFETY RULES WARNING: ALL LEAD ACID BATTERIES GENERATE HYDROGEN GAS DURING NORMAL OPERATION. THIS PROCESS INCREASES DURING A PERIOD OF RAPID DISCHARGE, SUCH AS WHEN USING FOR JUMPSTARTING.
CSS1 - Spotlight compressor (08-0540-2).book Page 5 Thursday, June 17, 2010 10:26 AM SAFETY SYMBOLS Class II appliance Always read instructions before use Electrical Hazard due to exposed live terminals Chemical Hazard from battery acid USB Port Live centre pin Suitable for indoor use only (refers to mains adaptor only) Subject to Waste Electrical &...
Page 6
CSS1 - Spotlight compressor (08-0540-2).book Page 6 Thursday, June 17, 2010 10:26 AM OVERVIEW DESCRIPTION NO DESCRIPTION Control Switches Pressure Gauge DC 12V Socket Spotlight LED Lights USB Charger Air Hose Storage Charging Jack Socket Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Page 7
CSS1 - Spotlight compressor (08-0540-2).book Page 7 Thursday, June 17, 2010 10:26 AM CHARGING TO ENSURE MAXIMUM LIFE FROM THE BATTERY. • Charge this unit before using it for the first time. • Recharge after every use if possible, and thereafter, once every three months.
CSS1 - Spotlight compressor (08-0540-2).book Page 8 Thursday, June 17, 2010 10:26 AM USING THE CSS1 VIA THE CAR CIGARETTE SOCKET 1. With the vehicle running, Connect the end of the 12V male-to-male car power cord which does not had a LED light on it to the DC 12V socket on your CSS1.
2. Connect the end of the 12V male-to-male car power cord which does not had a LED light on it to the DC 12V socket on your CSS1. 3. Put the other end (which has a LED on it) into the vehicle's lighter socket.
CSS1 - Spotlight compressor (08-0540-2).book Page 10 Thursday, June 17, 2010 10:26 AM MAINTENANCE CLEANING • Wipe the body of the unit clean using a soft damp cloth. • Do not use harsh abrasives to clean this product. SERVICE AND REPAIR •...
Need help?
Do you have a question about the CSS1 and is the answer not in the manual?
Questions and answers