Function Menu Settings - Casio CTK-7300IN User Manual

4.
To exit the function menu, press the R-13
(FUNCTION) button or R-15 (EXIT) button.
• Note that all function menu settings you configure are
returned to their initial defaults whenever you turn off
the Digital Keyboard. You can configure the Digital
Keyboard so it remembers its latest settings or to apply
predetermined default settings each time you turn it on.
For details, see "AutoResume (Auto Resume)" (page
E-134) and "Default (Default Settings)" (page E-134).
• Some function menu settings also can be saved to
registration memory. For details, see "Saving
Keyboard Setups to Registration Memory" (page E-66).

Function Menu Settings

This section explains the meaning of each function menu
setting item, and provides information about setting ranges
and initial default values.
• For each item, the initial default setting is indicated by an
asterisk (*).
Tune (Tuning)
Fine tunes the overall keyboard tuning in 0.1 Hz steps.
*
A4=415.5 - 440.0 - 465.9 Hz
• Changing the tuning value does not affect audio playback
(page E-126).
EQ (Equalizer)
One of ten presets can be selected to change the overall
frequency characteristics of the sound.
oFF :Equalizer off
Soft :Suppressed high tones for a softer sound
Bright :Enhanced high tones for a brighter sound
B.Boost :Enhanced low tones (Bass Boost)
Powerful :Enhanced volume
MegaVol1*:Tone optimized for maximum volume
MegaVol2 :Tone optimized for maximum volume, with more
emphasis on the bass drum than MegaVol1
HLBoost :Boosted high and low tones for good clarity even
at low volumes
LineOut1 :Completely flat tone for Line Out and headphone
use (Intended for a full-performance PA and
high-end headphones.)
LineOut2 :Slightly compensated high-range and low-range
tones for Line Out and headphones (Intended for
small household speakers and general purpose
headphones.)
Using the Function Menu
Lights
E-131