Midi Group; General (Other) Group - Casio CTK-7300IN User Manual

Using the Function Menu

MIDI Group

KeyboardCh (Keyboard Channel)
Selects the channel for sending keyboard play MIDI data to an
external device (keyboard channel).
*
01 - 16
LocalCtrl (Local Control)
Specifies whether pressing a key sounds the internal sound
*
source (on ) or whether the keyboard and internal sound
source should be disconnected (oFF).
AccompOut (Accompaniment MIDI Out)
Specifies if Auto Accompaniment MIDI data should be sent to
an external device (on) or not sent to an external device
*
(oFF ).

General (Other) Group

Speaker (Speaker ON/OFF)
Turns speaker output on or off.
*
Select "on " to enable output from the Digital Keyboard's
speakers or "oFF" to disable speaker output. Output continues
to be performed from the T-9 (PHONES) and T-8 (LINE OUT)
jacks even when "oFF" is selected for this setting.
A pointer indicator is displayed next to SP.OFF when "oFF" is
selected for this item.
Contrast (LCD Contrast)
Adjusts display contrast.
*
01 - 09 - 17
E-134
AutoPower (Auto Power Off)
Specifies if Auto Power Off (page E-13) is enabled (on
disabled (oFF). Even when "on" is selected for this setting,
you can temporarily disable Auto Power Off by holding down
the L-3 ([A] POPS/ROCK/DANCE) button as you press the
L-1 (P) button to turn on power.
AutoResume (Auto Resume)
Specifies whether the Digital Keyboard should remember its
setup when turned off and restore it the next time it is turned
on.
*
oFF : Restores power on defaults when power is turned on.
on : Remembers setup when power is turned off and
restores it when power is turned back on.
• For information about the setting items that are restored
when Auto Resume is enabled, see "Parameter List" (page
E-162).
• Initially, power on default settings are the same as the
factory default settings. You also can use the procedure
below to specify other power on default settings to suit your
needs.
Default (Default Settings)
You can use this setting item to do the following.
• Rewrite the power on default settings with the Digital
Keyboard's current setup (registering default settings).
• Return the power on default settings to the factory default
settings (clearing default settings).
■ To register or clear default settings
1.
Press the R-13 (FUNCTION) button to display
the function menu.
2.
Use the R-17 (i, y) buttons to move the 0 to
"General" and then press the R-16 (ENTER)
button.
3.
Use the R-17 (t, y) buttons to move the 0 to
"Default" and then press the R-16 (ENTER)
button.
• This displays the default setting screen like the one
shown below.
*
) or