Casio CTK-7300IN User Manual page 54

Drawbar Organ Tone Parameter Settings
The table below shows the parameters that can be configured on the drawbar editor screen.
The settings marked with an asterisk (*) in the "Setting Range" column are initial defaults.
Parameter Name
Ft16' to Ft1'
(Drawbar 16' to Drawbar 1')
Perc. 2nd
(2nd Overtone Percussion)
Perc. 3rd
(3rd Overtone Percussion)
Perc.Decay
(Percussion Decay Time)
On Click
(Key On Click)
Off Click
(Key Off Click)
Type
(Wave Type)
Vib.Rate
(Vibrato Rate)
Vib.Depth
(Vibrato Depth)
DSP On Off
to
Rot Button Off Value
*1 Makes sustained tones more lively. A percussion sound is sounded at its strongest immediately after a keyboard key is
pressed, and then gradually decays in accordance with the "Perc.Decay" setting. Though keeping keyboard keys depressed
will continue to sound organ notes, only the percussion sound decays.
• While the drawbar edit screen is displayed, you can change the parameters of drawbar 16' through 1' using sliders D-4 (16')
through D-12 (1').
Adjusts a tone's foot "length" harmonic overtone levels (16' to 1').
When "on", a percussion sound with 2nd harmonic (2nd) or 3rd harmonic
(3rd) pitch is applied to notes.
Specifies the decay time of percussion sound. A larger value specifies a
longer decay time.
When "on", a click is sounded when a note starts to sound.
When "on", a click sound is added when a keyboard key is released.
"Sin" (Sine) is a waveform that does not include noise, while "Vin"
(Vintage) is a waveform that includes characteristic noise of an electric
organ.
Specifies the speed of the vibrato applied to a note.
Specifies how much vibrato is applied to a note.
For information about these parameters, see the items starting from "DSP On Off (DSP On/
Off)" under "Tone Parameter Settings" (pages E-48 through E-49).
Using Drawbar Organ Tones
Setting
*1
Setting Range
0* to 8
oFF*, on
oFF*, on
000* to 127
oFF*, on
oFF*, on
Sin*, Vin
000 to 64* to 127
000* to 127
E-53