Function Menu Settings - Casio CTK-6300in User Manual

4.
To exit the function menu, press the R-13
(FUNCTION) button or R-15 (EXIT) button.
• Note that all function menu settings you configure are
returned to their initial defaults whenever you turn off
the Digital Keyboard. You can configure the Digital
Keyboard so it remembers its latest settings or to apply
predetermined default settings each time you turn it on.
For details, see "AutoResume (Auto Resume)" (page
E-98) and "Default (Default Settings)" (page E-98).
• Some function menu settings also can be saved to
registration memory. For details, see "Saving
Keyboard Setups to Registration Memory" (page E-60).

Function Menu Settings

This section explains the meaning of each function menu
setting item, and provides information about setting ranges
and initial default values.
• For each item, the initial default setting is indicated by an
asterisk (*).
Tune (Tuning)
Fine tunes the overall keyboard tuning in 0.1 Hz steps.
*
A4 = 415.5 - 440.0 - 465.9 Hz
EQ (Equalizer)
One of five presets can be selected to change the overall
frequency characteristics of the sound.
oFF : Equalizer off
Soft : Suppressed high tones for a softer sound
Bright : Enhanced high tones for a brighter sound
B.Boost : Enhanced low tones (Bass Boost)
*
Powerful : Enhanced volume
Performance (Performance/Accompaniment)
Group
• You can directly display this group screen without going
through the function menu. While the initial power on
screen is displayed, hold down the R-13 (FUNCTION)
button as you press the C-13 (MENU) button.
Touch (Touch Response)
Select one of the settings below to specify the relationship
between key pressure and note volume.
oFF : Constant note volume regardless of keyboard pressure
*
1 : Normal
2 : Strong sound even with light pressure
TchOffVel (Touch Off Velocity)
Specifies the velocity value setting when the Touch setting is
off.
000 - 100
Ped.Setting (Pedal Setting)
■ Ped.Assign (Pedal Assign)
Specifies the operation of the pedal connected to T-3
(SUSTAIN/ASSIGNABLE JACK).
*
SUS : Sustain pedal
SSt : Sostenuto pedal
SFt : Soft pedal
rHy : Rhythm start/stop switch
■ Upper1, Upper2, Lower, A.HAR.
These settings specially on
applied) for the UPPER 1, UPPER 2, LOWER, and Auto
Harmonize parts for the operation currently assigned to the
Lights
pedal.
Upper1 : UPPER 1
Upper2 : UPPER 2
Lower : LOWER
A.HAR. : Auto Harmonize
• When the Pedal Assign setting is "rHy", the on/off settings
of these parts are disabled, and the pedal functions as a
rhythm start/stop switch.
BendRange (Bend Range)
Specifies the range of pitch change that occurs when the
PITCH BEND wheel (S-1) is rotated.
*
00 - 02 - 24 semitones
Using the Function Menu
*
- 127
*
(effect applied) or oFF (effect not
E-95