Casio CTK-7300IN User Manual page 100

To adjust the gate time value of a note event
1.
Perform steps 1 through 5 under "To adjust the
velocity value of a note event" (page E-98). In
step 4, select "GatetimeMod." instead of
"VelocityMod.".
2.
Press the R-16 (ENTER) button.
• This will display the setting screen like the one shown
below.
• The following explains the meanings and setting ranges
of the on-screen items. The settings marked with an
asterisk (*) in the "Setting Range" column are initial
defaults.
Item name Description
Fix Specifies a fixed value as the
(Fixed value) time gate value. 99:95 stands
for quarter note 99 beats, 95
ticks.
Select "oFF" for this setting to
adjust based on the current
gate time value of each note
event.
Rate These settings are enabled
(Gate Time only when the "oFF" is
Rate) selected for the "Fix" setting.
They change the gate time
value of each note event
according to the mathematical
expression (decimal parts cut
off) shown below. 00:00 is
Offset
used when the value
(Gate Time
produced by the expression is
Offset)
less than 00:00, and 99:95 is
used when it is greater than
99:95.
(Current gate time) X (Rate
setting) + (Offset setting)
3.
To change the setting to the desired value,
press the R-16 (ENTER) button.
4.
In response to the "Sure?" message that
appears, press the R-14 (YES) button to execute
the adjustment or the R-14 (NO) button to
cancel.
To delete a beat event
1.
2.
3.
4.
Setting Range
*
oFF ,
00:00 to 99:95
*
000% to 100% to
200%
*
–9:95 to 0:00 to
+9:95
Using the Song Sequencer
Perform the procedure under "To start an event
editor operation" (page E-87) to display the
event editor menu.
Use the R-17 (y) button to move the 0 to
"Beat" and then press the R-16 (ENTER) button.
• This displays the "Beat" screen.
Use the R-17 (t, y) buttons to move the
cursor to the beat event you want to delete.
Press the C-10 (DELETE) button.
• The event at the current cursor position will be deleted
as soon as you press the C-10 (DELETE) button.
E-99