Casio CTK-7300IN User Manual page 133

Table of Contents

Advertisement

Using the Function Menu
Performance (Performance/Accompaniment)
Group
• You can directly display this group screen without going
through the function menu. While the initial power on
screen is displayed, hold down the R-13 (FUNCTION)
button as you press the C-17 (MENU) button.
Touch (Touch Response)
Select one of the settings below to specify the relationship
between key pressure and note volume.
oFF : Constant note volume regardless of keyboard pressure
*
1
: Normal
2
: Strong sound even with light pressure
TchOffVel (Touch Off Velocity)
Specifies the velocity value setting when the Touch setting is
off.
*
000 - 100
- 127
Ped.Setting (Pedal Setting)
■ Ped.Assign (Pedal Assign)
Specifies the operation of the pedal connected to T-3
(SUSTAIN/ASSIGNABLE JACK).
*
SUS
: Sustain pedal
SSt : Sostenuto pedal
SFt : Soft pedal
rHy : Rhythm start/stop switch
■ Upper1, Upper2, Lower, A.HAR.
These settings specially on* (effect applied) or oFF (effect not
applied) for the UPPER 1, UPPER 2, LOWER, and Auto
Harmonize parts for the operation currently assigned to the
pedal.
Upper1 : UPPER 1
Upper2 : UPPER 2
Lower : LOWER
A.HAR. : Auto Harmonize
• When the Pedal Assign setting is "rHy", the on/off settings
of these parts are disabled, and the pedal functions as a
rhythm start/stop switch.
E-132
BendRange (Bend Range)
Specifies the range of pitch change that occurs when the
PITCH BEND wheel (S-1) is rotated.
*
00 - 02
- 24 semitones
ArpegHold (Arpeggiator Hold)
Specifies the how arpeggio is played in accordance with
pressed keyboard keys when the arpeggiator (page E-23) is
being used.
*
oFF
: Arpeggio played while the keys of a chord are
depressed on the keyboard
on : Arpeggio played after keyboard keys are released
• When "on" is selected for this setting, you can turn off
arpeggio play pressing the R-18 (AUTO HARMONIZE/
ARPEGGIATOR) button to disable the arpeggiator, or you
can change this setting to "oFF".
ArpegSpeed (Arpeggiator Speed)
Specifies how many times notes or chords should sound
within one beat for arpeggio phrases played by the
arpeggiator (page E-23).
*
1, 2, 2S, 3, 4
, 4S, 6, 8
The setting value indicates the number of times within one
beat. Selecting an option that is only a value will sound the
note that number of times within one beat. Selecting "4", for
example, will play with the rhythm 7777.
Selecting an option that includes the letter "S" will play a
2 6
shuffle. 2S plays
and 4S plays
• The availability of the settings for this item depends on the
arpeggiator type. Refer to the separate "Appendix" for
details.
ArpegPart (Arpeggiator Part)
Specifies whether arpeggiator play with the tone of any part
should be used for the UPPER part keyboard or LOWER part
keyboard when the arpeggiator (page E-23) is used while the
keyboard is used while Layer and/or Split is turned on (page
E-15).
U12* : UPPER part keyboard, Upper 1 and Upper 2 tones
played.
U1
: UPPER part keyboard, Upper 1 tone played.
U2
: UPPER part keyboard, Upper 2 tone played.
Low : LOWER part keyboard, Lower tone played.
• If "U2" is selected, arpeggios are played when Layer is on
(page E-16).
• If "Low" is selected, arpeggios are played when Split is on
(page E-16).
6767
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctk-7200Wk-7600

Table of Contents