Applying Effects To A Sound; Configuration Of Effects - Casio CTK-7300IN User Manual

Applying Effects to a Sound

You can apply a variety of different acoustic effects to the sounds produced by the Digital Keyboard. The built-in effects include a
wide variety of variations that give you access to a selection of general digital effects.
• The Digital Keyboard also lets you apply effects to input from the T-4 (INST IN) jack and T-6 (MIC IN) jack.

Configuration of Effects

The following shows how Digital Keyboard effects are configured.
• Items such as "Reverb Send" that are indicated by the symbol
(page E-36).
• Chorus and DSP cannot be used at the same time.
■ Chorus Effect Mode Configuration
The chorus effect mode is enabled while "Chorus" is selected for the "Chorus/DSP" effect parameter. Chorus and reverb can be
used in the chorus effect mode.
Tone Generator
Mic In
Noise Gate
Inst In
• For information about "Chorus/DSP", see "Selecting an Effect" (page E-31).
Part A01-A16, B01-B16
Part Volume/Pan
Reverb Send
External Input
Volume/Pan
Reverb Send
Auto Level
Control
are all mixer settings. For details, see "Using the Mixer"
Chorus Send
Chorus Send
Master
Volume/Pan
Reverb
Chorus
Mono
Stereo
Output
E-29