Synchronisation With The Pc; Installing Microsoft ® Activesync - Medion Navigation Unit Operating Instructions Manual

Synchronisation with the PC

I. Installing Microsoft
In order to transfer data between your PC and your navigation system you need the
®
Microsoft ActiveSync
The cost of the navigation system includes a license for this program which can be
found on the CDs/DVDs.
Note
You will not need the ActiveSync
are a user of the Windows Vista® operating system. The system files
necessary for the simple data transfer are already integrated into your
Vista® operating system.
Procedure for Vista users:
Please connect your device to your PC with the help of the USB syn-
chronization cable. The necessary drivers will be installed automati-
cally, after the new device has been found. Your new device will be
listed under the 'Portable Devices' point in the Windows Explorer
overview, following a successful installation.
Attention
Important files can be overwritten or changed during the installation
of software. You should create a hard disk backup, in order to be able
to have access to the original files in the case of possible problems
following the installation.
You must have administrator rights to install the software under Windows
XP.
Attention
You should not connect the navigation system to your computer yet.
1. Insert the Support CD and wait until the program starts automatically.
Note
If it does not function, the Auto Run function is probably deacti-
vated. The Setup program on the CD must be started, to start instal-
lation manually.
2. Choose the language, click then Install ActiveSync
tions on the screen.
®
ActiveSync
®
program.
®
Appendix
®
communications software, if you
®
2000 or
®
and follow the instruc-
57