Synchronisation With The Pc; Installing Microsoft Activesync - Medion Navigation Unit Operating Instructions Manual

Synchronisation with the PC

I. Installing Microsoft
In order to transfer data between your PC and your navigation system you need the Micro-
soft® ActiveSync® program.
The cost of the navigation system includes a license for this program which can be found
on the DVD.
Note
You will not need the ActiveSync® communications software, if you are a
user of the Windows Vista® operating system. The system files necessary
for the simple data transfer are already integrated into your Vista® operat-
ing system.
Procedure for Vista users:
Please connect your device to your PC with the help of the USB synchroni-
zation cable. The necessary drivers will be installed automatically, after the
new device has been found. Your new device will be listed under the 'Port-
able Devices' point in the Windows Explorer overview, following a success-
ful installation.
Attention!
Important files can be overwritten or changed during the installation of
software. You should create a hard disk backup, in order to be able to have
access to the original files in the case of possible problems following the
installation.
You must have administrator rights to install the software under Windows
Important
You should not connect the navigation system to your computer yet.
1. Insert the DVD and wait until the program starts automatically.
Note
If it does not function, the Auto Run function is probably deactivated. The
Setup program on the DVD must be started, to start installation manually.
2. Choose the language, click then Install ActiveSync® and follow the instructions
on the screen.
UK/ N. IRELAND HELPLINE 0871 37 61 020
REP. IRELAND HELPLINE 1-800-992508
® ®
ActiveSync
- 47 -
®
2000 or XP.