Drive Guard; Carburetor Coolant Shut-Off Lever - Yamaha VK10L Owner's Manual

ESU00521

Drive guard

The drive guard is designed to cover the V-belt clutch
and V-belt in case parts break or come loose.
WARNING
@
G
Make sure that the drive guard is tightened
securely before operating the snowmobile.
G
Never run the engine with the V-belt or drive
guard removed.
@
ESU04080

Carburetor coolant shut-off lever

The carburetor coolant shut-off lever controls the flow of
coolant through the carburetor.
Make sure that the lever is in the "ON" position to allow
the coolant to flow and warm the carburetor while the
ambient temperature is below 0 °C (32 °F).
1 Carburetor coolant shut-off lever
2 "ON" (open)
3 "OFF" (closed)
CAUTION :
@
When operating the snowmobile in temperatures
above 0 °C (32 °F), move the carburetor coolant shut-
off lever to the "OFF" position to stop the flow of
coolant, since the carburetor does not need to be
warmed.
@
5-12