Shroud And Covers; Drive Guard - Yamaha FX Nytro FX10Y Owner's Manual

1. Pull out.
2. Slide to "REV" (reverse).
3. Push in.
ECS00072
NOTICE
Do not use the shift lever while the snow-
mobile is moving, otherwise the drive train
could be damaged.
ESU10722

Shroud and covers

Securely fasten the shroud and covers before
operating the snowmobile. (See page 44 for
removal and installation procedures.)
2
1. Shroud
2. Right side cover
1. Left side cover
ESU12733

Drive guard

EWS00401
WARNING
Coming in contact with the rotating V-
G
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.
Make sure that the drive guard is tight-
G
ened securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
1
ECS00830
NOTICE
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
The drive guard is designed to protect the V-
belt clutch and V-belt in case parts break or
come loose.
The drive guard is located behind the left side
cover. (See page 44 for removal procedures.)
Control functions
1
17