Adjusting The Valve Clearance; Changing The Engine Oil - Yamaha VK10L Owner's Manual

Hide thumbs Also See for VK10L:
Table of Contents

Advertisement

ESU00348

Adjusting the valve clearance

The valve clearance changes with use, resulting in
improper air-fuel mixture and/or engine noise. To prevent
this from occurring, the valve clearance must be adjusted
by a Yamaha dealer at the intervals specified in the peri-
odic maintenance chart.
ESU04201

Changing the engine oil

It is recommended to have a Yamaha dealer change the
engine oil.
WARNING
@
Engine oil is extremely hot immediately after the
engine is turned off. Coming into contact with or get-
ting any engine oil on your clothes could result in
burns.
@
CAUTION :
@
G
Do not run the engine with too much or not
enough oil in the oil tank. Oil could spray out or
the engine could be damaged.
G
Be sure to change the engine oil after the first
800 km (500 mi) of operation, and every 4,000 km
(2,500 mi) thereafter or at the start of a new sea-
son, otherwise the engine will wear quickly.
G
The oil filter cartridge should be replaced every
20,000 km (12,000 mi) of operation.
@
To change the engine oil (with or without oil filter
cartridge replacement)
1. Place the snowmobile on a level surface and apply
the parking brake.
2. Remove the bottom panel 1 and right side cover 2.
3. Start the engine, warm it up for several minutes, and
then turn it off.
4. Place oil pans under both the engine and the oil tank
to collect the used oil.
8-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents