Stopping The Engine; Transporting - Yamaha RX10GTW Owner's Manual

2. Release the parking brake by moving the parking
brake lever to the right.
3. Press the throttle lever slowly to move the snowmo-
bile.
4. Turn the handlebar in the desired direction.
5. Squeeze the brake lever to stop the snowmobile.
6. Apply the parking brake by moving the parking brake
lever to the left.
ESU00136

Stopping the engine

Turn the main switch to the "OFF" position to stop the
engine.
1 "OFF"
WARNING
@
G Push down the engine stop switch to stop the
engine in an emergency.
G
Make sure that the key is removed from the main
switch whenever the operator leaves the snow-
mobile, to prevent accidental starting.
@
ESU04650

Transporting

When transporting your snowmobile on a trailer or in a
truck, observe the following recommendations to help
protect it from damage:
G If transporting the snowmobile in an open trailer or
truck, put a tight fitting cover on the snowmobile. A
cover specifically designed for your snowmobile is
best. This will help keep foreign objects out of the
cooling vents in the shroud, and also help protect the
snowmobile against damage from debris on the road.
G If transporting the snowmobile in an open trailer or
truck in areas where road salt is used, coat metal
suspension surfaces lightly with oil or another pro-
tectant. This will help protect against corrosion. Be
sure to clean the snowmobile when you get to your
destination to remove any corrosive salts.
7-9