Changing The Brake Fluid; Suspension - Yamaha RX10GTW Owner's Manual

ESU01811

Changing the brake fluid

Brake fluid replacement is necessary when the following
components are replaced during the periodic mainte-
nance or if they are damaged or leaking.
a. All oil seals of the master cylinder and caliper cylinder
b. The brake hose
WARNING
@
Make sure that the brake fluid and the above parts
are replaced by a Yamaha dealer.
@
ESU00183

Suspension

The suspension can be adjusted to suit rider preference.
A softer setting, for example, may provide greater rider
comfort, while a harder setting may allow more precise
handling and control over certain types of terrain or riding
conditions.
WARNING
@
Be sure to have a Yamaha dealer make this adjust-
ment.
@
ESU02372
Adjusting the ski spring preload
The spring preload can be adjusted by turning the spring
preload adjuster 1.
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
CAUTION :
@
The left and right ski spring preload must be set to
the same setting. Uneven settings can cause poor
handling and loss of stability.
@
8-22
Standard
Increased ←
←
Harder
Maximum
129.0 mm 119.0 mm
(5.08 in) (4.69 in)
→ Decreased
→
Softer
Minimum
119.0 mm
(4.69 in)