Table of Contents
Advertisement
1. Drive select switch
2. Drive indicator light "
3. Reverse indicator light "
TIP
If the indicator light keeps flashing, the snow-
mobile is not correctly shifted into drive or re-
verse. If this occurs, applying a little throttle
while applying the brake will help the trans-
mission to engage.
TIP
The reverse buzzer beeps while the transmis-
sion is in reverse.
2.
While squeezing the brake lever, release
the parking brake by moving the parking
brake lever to the right, and then release
the brake lever.
3.
Squeeze the throttle lever slowly to start
out.
4.
Turn the handlebar in the desired direc-
tion.
"
"
5.
Squeeze the brake lever to stop the
snowmobile.
6.
Apply the parking brake by moving the
parking brake lever to the left.
ESU11411
Stopping the engine
Turn the main switch to the off position to
G
stop the engine.
1
1. Off
Push down the engine stop switch to stop
G
the engine in an emergency.
ESU11430
Transporting
When transporting your snowmobile on a trail-
er or in a truck, observe the following recom-
mendations to help protect it from damage:
If transporting the snowmobile in an open
G
trailer or truck, put a tight fitting cover on the
snowmobile. A cover specifically designed
for your snowmobile is best. This will help
keep foreign objects out of the cooling
Operation
43
Advertisement
Table of Contents
