Replacing A Fuse - Yamaha RX10GTW Owner's Manual

Table of Contents

Advertisement

ESU05050

Replacing a fuse

WARNING
@
Be sure to use the specified fuse. A wrong fuse
could cause electrical system damage or A FIRE
HAZARD.
@
CAUTION :
@
Be sure to turn the main switch to "OFF" and discon-
nect the negative battery lead to prevent accidental
short-circuiting.
@
1. Remove the shroud, the left and right side covers,
and the top cover. (See pages 8-5–8-7 for removal
procedures.)
2. Remove the headlight unit bolts 1, disconnect the
headlight couplers and speedometer coupler, and
then remove the headlight unit.
3. Unhook the latch 2 and disconnect the air tempera-
ture sensor coupler 3.
4. Loosen the joint clamp screws 4.
5. Slide the clamps 5 away from the air filter case, and
then disconnect the crankcase breather hose 6 and
the bypass air hose 7.
6. Slide the clamp 8 down, and then disconnect the air
filter case drain hose 9.
7. Remove the air filter case.
8. Disconnect the negative battery lead.
8-34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rxw10gtw

Table of Contents