Table of Contents
Advertisement
To adjust the display brightness
1. Turn the main switch to "OFF".
2. Push and hold down the "SELECT" button 1.
3. Turn the main switch to "ON", and then, after 5 sec-
onds, release the "SELECT" button.
4. Push the "RESET" button 2 to select the desired dis-
play brightness level 3, and then push the "SELECT"
button. The normal display returns when the
"SELECT" button is released.
NOTE:
@
If the main switch is turned to "OFF" or the engine is
started before completing the procedure, the setting is
not applied.
@
ESU00363
High beam indicator light
The high beam indicator light 1 comes on when the high
beams of the headlights are switched on. (See page 5-13
for headlight beam switch operation.)
ESU05012
Fuel meter, grip/thumb warmer level indicator,
and rear suspension compression damping
level indicator
The fuel meter, grip/thumb warmer level indicator, and
rear suspension compression damping level indicator
have eight segments 1 which show the amount of fuel
remaining in the fuel tank, the grip warmer level or the
thumb warmer level, and the compression damping force
level of the electronically controlled rear shock absorber
respectively.
5-6
Advertisement
Table of Contents
