ESU04730
Shroud and covers
Securely fasten the shroud and covers before operating
the snowmobile. (See pages 8-5–8-7 for removal and
installation procedures.)
1 Shroud
2 Right side cover
3 Left side cover
4 Top cover
WARNING
@
G
Do not drive the snowmobile with the shroud or
covers unfastened or removed.
G
Keep your body and clothing away from rotating
parts when servicing the snowmobile with the
shroud or covers removed.
G
Do not touch the hot muffler and engine during or
immediately after operation.
@
CAUTION :
@
Make sure that all cables, leads, etc., are in place
when installing the shroud and covers.
@
ESU00521
Drive guard
The drive guard is designed to cover the V-belt clutch
and V-belt in case parts break or come loose.
WARNING
@
G
Make sure that the drive guard is tightened
securely before operating the snowmobile.
G
Never run the engine with the V-belt or drive
guard removed.
@
5-14