Yamaha BIGBEAR 250 Owner's Manual page 46

1. Forward "F"
6
2. Reverse "R"
3. Drive select lever
4. Release the brake pedal, and then open the
throttle lever gradually.
Shifting: Forward to Reverse
NOTE:
To shift into reverse, the transmission must be in
first gear.
1. Bring the ATV to a complete stop.
2. Apply the brake pedal.
3. Shift the transmission into first gear.
4. Move the drive select lever to the rear until it
completely stops.
1. Forward "F"
2. Reverse "R"
3. Drive select lever
NOTE:
When in reverse, the reverse indicator light should
be on. If the indicator light does not come on, have
a Yamaha dealer check the electrical circuit.
5. Check behind you for people or obstacles,
and then release the brake pedal.
6. Open the throttle lever gradually and continue
to watch to the rear while backing.
6-4