Replacing A Headlight Bulb - Yamaha BIGBEAR 250 Owner's Manual

Table of Contents

Advertisement

3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU26892

Replacing a headlight bulb

If a headlight bulb burns out, replace it as follows.
1. Remove the bulb holder cover at the rear of
the headlight by pulling it off.
1. Headlight bulb holder cover
2. Disconnect the headlight coupler by lifting the
tab as shown and pulling out the coupler.
1. Headlight coupler
3. Remove the headlight bulb holder assembly
by turning it counterclockwise.
1. Headlight bulb holder assembly
8-42
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm25bwBigbear 250 yfm25bw

Table of Contents