Yamaha BIGBEAR 250 Owner's Manual page 128

NOTE:
The headlight bulb cannot be removed from the
headlight bulb holder. To replace the headlight
bulb, replace the headlight bulb holder assembly.
EWB02180
POTENTIAL HAZARD
A headlight bulb is hot when it is on and im-
mediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start if the
bulb touches something flammable.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching or
removing it.
8
4. Install a new headlight bulb holder assembly
by inserting it into the headlight unit and turn-
ing it clockwise.
WARNING
1. Do not touch the glass part of the bulb.
ECB00650
CAUTION:
Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner.
5. Connect the headlight coupler.
6. Install the headlight bulb holder cover at the
rear of the headlight.
8-43