1. Final gear oil
2. Correct oil level
3. Final gear oil filler bolt
3. If the oil is below the brim of the filler hole, add
8
sufficient oil of the recommended type to raise
it to the correct level.
4. Install the oil filler bolt, and then tighten it to the
specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
To change the final gear oil
1. Remove the final gear case guard by remov-
ing the bolts.
1. Final gear case cover
2. Bolt
2. Place the ATV on a level surface.
3. Place an oil pan under the final gear case to
collect the used oil.
4. Remove the final gear oil filler bolt and the fi-
nal gear oil drain bolt to drain the oil from the
final gear case.
8-17