Yamaha BIGBEAR 250 Owner's Manual page 123

checked before each ride and at the intervals
specified in the periodic maintenance and lubrica-
tion chart.
To check the electrolyte level
1. Place the ATV on a level surface.
2. Remove the battery cover by pulling it upward.
1. Battery cover
3. Check the electrolyte level in the battery.
1. Battery
2. Maximum level mark
3. Minimum level mark
NOTE:
The electrolyte should be between the minimum
and maximum level marks.
4. If the electrolyte is at or below the minimum
level mark, add distilled water to raise it to the
maximum level mark.
ECB00590
CAUTION:
Use only distilled water, as tap water contains
minerals that are harmful to the battery.
8-38
8