Adjusting The Shock Absorber; Assembly - Yamaha TT-R250 Owner's Manual

(b)
1. Damping force adjusting screw
Damping setting:
Minimum (soft):
20 clicks in direction (b)*
Standard:
11 clicks in direction (b)*
Maximum (hard):
1 click in direction (b)*
* With the adjusting screw fully
turned in direction (a)
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
3. Securely install the rubber caps.
INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
Be sure to install the rubber caps to
prevent dust, etc. from entering the
fork legs.
1
NOTE:
Although the total number of clicks of a
(a)
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
ECA10100
ECA10960

Adjusting the shock absorber

assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing nut, a rebound damping force ad-
justing
damping force adjusting knob.
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
Spring preload
1. Locknut
2. Adjusting nut
1. Loosen the locknut.
3-9
dial and a compression
1 2
(b)
(a)
A
EAU15070
2
ECA10100
3
4
5
6
7
8
9