Yamaha TT-R250 Owner's Manual page 29

INSTRUMENT AND CONTROL FUNCTIONS
With the engine turned off:
1. Make sure that the engine stop switch is set to " ".
2. Turn the key to "ON".
1
3. Shift the transmission into the neutral position.
4. Push the start switch.
2
Does the engine start?
3
5. Turn the engine off.
6. Shift the transmission into gear.
4
7. Keep the clutch lever pulled.
8. Push the start switch.
5 Does the engine start?
6
The system is OK. The motorcycle can be ridden.
7
8
9
YES NO
YES
NO
NOTE:
This check is most reliable if performed with
a warmed-up engine.
The neutral switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
3-12