PERIODIC MAINTENANCE AND MINOR REPAIR
NOTE:
The engine oil should be between the
minimum and maximum level marks.
1
2
3
4
5
1. Engine oil level check window
2. Maximum level mark
6
3. Minimum level mark
4. If the engine oil is below the mini-
7
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
8
To change the engine oil (with or
without oil filter element cleaning)
9
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler bolt
and drain bolt to drain the oil from
the crankcase.
1
2
1
3
1. Engine oil filler bolt
1. Engine oil drain bolt
NOTE:
Check each washer for damage and re-
place them if necessary.
4. Remove the oil filter element drain
1. Oil filter element drain bolt
2. Bolt
3. Oil filter element cover
NOTE:
Skip steps 5–9 if the oil filter element is
not being cleaned.
5. Remove the oil filter element cover
1
6. Remove the oil filter element and
6-9
bolt to drain the oil from the oil filter
element.
3
2
(×2)
1
by removing the bolts.
O-rings.