Checking The Connections - Yamaha YZF-R7 Owner's Service Manual

Hide thumbs Also See for YZF-R7:

Table of Contents

CHECKING THE CONNECTIONS

CHECKING THE CONNECTIONS

Check the leads, couplers, and connectors

for stains, rust, moisture, etc.

1. Disconnect:

If the pin 1 on the terminal is flattened,

Make sure that all connections are tight.

• If there is no continuity, clean the termi-

• When checking the wire harness, perform

• As a quick remedy, use a contact revital-

Dry with an air blower.

Connect and disconnect

several times.

• all connections

Loose connection

• continuity

(with the pocket tester)

Pocket tester

steps (1) to (3).

izer available at most part stores.

Connect properly.

Show Quick Links

Table of Contents