Yamaha YZF-R7 Owner's Service Manual page 313

FRONT FORK
8. Install:
• dust seal 1
(with the fork seal driver 2)
9. Install:
• rod puller 1
• adapter 2
(onto the damper rod 3)
Rod puller
90890-01437
Adapter
90890-01436
10.Fully compress the front fork leg.
11.Fill:
• front fork leg
(with the specified amount of the rec-
ommended fork oil)
Quantity (each front fork leg)
460 cm
(16.2 Imp oz, 15.6 US oz)
Recommended oil
Yamaha fork and shock oil
01 or equivalent
CAUTION:
ACHTUNG:
• Be sure to use the recommended fork
oil. Other oils may have an adverse
effect on front fork performance.
• When disassembling and assembling
the front fork leg, do not allow any for-
eign material to enter the front fork.
12.After filling the front fork leg, slowly
stroke the damper rod 1 up and down
(at least ten times) to distribute the fork
oil.
NOTE:
Be sure to stroke the damper rod slowly
because the fork oil may spurt out.
7 - 63
CHAS
3