Assembling The Rear Brake Master Cylinder - Yamaha YZF-R7 Owner's Service Manual

FRONT AND REAR BRAKES
a a
CAUTION:
ACHTUNG:
Brake fluid may damage painted sur-
faces and plastic parts. Therefore,
always clean up any spilt brake fluid
immediately.
4. Bleed:
• brake system
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
5. Check:
• brake fluid level
Below the minimum level mark a
Add the recommended brake fluid to
the proper level.
Refer to "CHECKING THE BRAKE
FLUID LEVEL" in chapter 3.
6. Check:
• brake lever operation
Soft or spongy feeling
brake system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EB702290
ASSEMBLING THE REAR BRAKE MASTER
CYLINDER
1. Install:
• copper washers
• brake hoses
• union bolt
WARNING
WARNING
Proper brake hose routing is essential to
insure safe motorcycle operation. Refer
to "CABLE ROUTING".
CAUTION:
ACHTUNG:
When installing the brake hose onto the
brake master cylinder, make sure that
the brake pipe touches the projection a
as shown.
7 - 41
CHAS
Bleed the
New
30 Nm (3.0 m · kg, 22 ft · lb)