Checking The Starter Clutch - Yamaha YZF-R7 Owner's Service Manual

CLUTCH
2. Check:
• back torque limiter clutch
a. Install the back torque limiter bearing
and back torque limiter outer boss
onto the back torque limiter inner
boss and hold the back torque limiter
inner boss.
b. When turning the back torque limiter
outer boss clockwise Å, the back
torque limiter inner boss and back
torque limiter outer boss should
engage, otherwise the back torque
limiter is faulty and must be replaced.
c. When turning the back torque limiter
outer boss counterclockwise ı, it
should turn freely, otherwise the back
torque limiter is faulty and must be
replaced.

CHECKING THE STARTER CLUTCH

1. Check:
• starter clutch gear
• starter clutch idle gear
Chips/pitting/roughness/wear
Replace the defective part(-s).
2. Check:
• starter clutch operation
a. Install the starter clutch gear 1 onto
the starter clutch 2 and hold the
starter clutch.
b. When turning the starter clutch gear
clockwise Å, the starter clutch and
the starter clutch gear should engage,
otherwise the starter clutch is faulty
and must be replaced.
c. When turning the starter clutch gear
counterclockwise ı, it should turn
freely, otherwise the starter clutch is
faulty and must be replaced.
4 - 45
ENG