Rear Brake Pedal Height Adjustment; Brake Light Switch Adjustment - Yamaha Diversion XJ600N Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
a. Pedal height
Rear brake pedal height
adjustment
The top of the brake pedal should be
positioned 40 mm below the top of the
footrest. If not, ask a Yamaha dealer to
adjust it.
A soft or spongy feeling in the brake
pedal can indicate the presence of
air in the brake system. This air
must be removed by bleeding the
brake system before the motorcycle
is operated. Air in the system will
cause greatly diminished braking
capability and can result in loss of
control and an accident. Have a
EAU00712
Yamaha dealer inspect and bleed
the system if necessary.
EW000109
1. Brake light switch
2. Adjusting nut

Brake light switch adjustment

The rear brake light switch is activated
by the brake pedal and is properly ad-
justed when the brake light comes on
just before braking takes effect. To ad-
just the rear brake light switch, hold the
switch body so it does not rotate while
turning the adjusting nut. Turn the ad-
justing nut in direction a to make the
brake light come on earlier. Turn the
adjusting nut in direction b to make the
brake light come on later.
6-17
EAU00713