Front Brake Lever Free Play Adjustment; Rear Brake Pedal Height Adjustment - Yamaha Venture XVZ1300TF Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Locknut
2. Adjusting bolt
c. Free play
Front brake lever free play
adjustment
The free play at the front brake lever
should be 2 ~ 5 mm.
7
1. Loosen the locknut.
2. Turn the adjusting
direction a to increase free play
or in direction b to decrease free
play.
3. After adjusting, tighten the locknut.
WARNING
@
Check the brake lever free play.
Be sure the brake is working
properly.
A soft or spongy feeling in the
brake lever can indicate the
presence of air in the brake sys-
tem. This air must be removed
by bleeding the brake system
before the motorcycle is operat-
ed. Air in the system will cause
EAU00696
greatly diminished braking ca-
pability and can result in loss of
control and an accident. Have a
Yamaha dealer inspect and
bleed the system if necessary.
@
bolt in
EW000099
1. Rear brake pedal
a. Brake pedal height
Rear brake pedal height
adjustment
The top of the brake pedal should be
positioned 100 mm above the top of
the footrest. If not, ask a Yamaha deal-
er to adjust it.
7-23
EAU01746