Helmet Holders; Storage Compartment; Rear Shock Absorber Adjustment - Yamaha Diversion XJ600N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1. Helmet holder (´ 2)

Helmet holders

The helmet holders are under the seat.
Remove the seat and hook the helmets
on the helmet holders. Then, install the
seat and lock it.
Never ride with helmets in the hel-
met holders. The helmets may hit
objects, causing loss of control and
possibly an accident.
1. Strap for U-LOCK (´ 2)
EAU02936

Storage compartment

This compartment is designed to store
a genuine Yamaha U-LOCK. (Other
locks may not fit.)
Be sure the lock is fastened securely
with the straps when storing it in the
EWA00022
compartment.
To prevent losing the straps, be sure to
secure them even when a U-LOCK is
not being stored in the compartment.
When storing this OwnerÕs manual or
other documents in the compartment,
be sure to put them in a vinyl bag so
they do not get wet. When washing the
motorcycle, be careful not to flood this
compartment with water.
1. Spring preload adjusting ring
2. Position indicator
EAU01688
Rear shock absorber
adjustment
This shock absorber is equipped with a
spring preload adjusting ring. Adjust
spring preload as follows. Turn the ad-
justing ring in direction a to increase
spring preload and in direction b to de-
crease spring preload. Make sure that
the appropriate notch in the adjusting
ring is aligned with the position indica-
tor on the rear shock absorber.
3-15
EAU00295