Engine Oil - Yamaha Diversion XJ600N Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
When installing a spark plug, the gas-
ket surface should always be cleaned
and a new gasket used. Any grime
should be wiped off from the threads
and the spark plug tightened to the
specified torque.
Tightening torque:
Spark plug:
12.5 Nm (1.25 mákg)
NOTE:
If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4 to 1/2 turn
past finger tight. The spark plug should
be tightened to the specified torque as
soon as possible.
1. Level window
2. Maximum level mark
3. Minimum level mark

Engine oil

Oil level inspection
1. Place the motorcycle on the cen-
terstand. Warm up the engine for
several minutes.
NOTE:
Be sure the motorcycle is positioned
straight up when checking the oil level.
A slight tilt toward the side can result in
false readings.
6-7
1. Engine oil filler cap
2. With the engine stopped, check
the oil level through the level win-
EAU02938
dow located at the lower part of
the right side crankcase cover.
NOTE:
Wait a few minutes until the oil level
settles before checking.
3. The oil level should be between
the maximum
marks. If the level is low, fill the en-
gine with sufficient oil to reach the
specified level.
and minimum