Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb; Supporting The Motorcycle - Yamaha V-Star XVS1100AWR Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw (× 2)
Replacing a turn signal light
bulb or the tail/brake light
bulb
6
1. Remove the lens by removing the
screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
1. Screw (× 3)
3. Insert a new bulb into the socket,
EAU00855
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
_
Do not overtighten the screws, oth-
erwise the lens may break.
_

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other mainte-
nance requiring the motorcycle to
stand upright. Check that the motor-
cycle is in a stable and level position
before starting any maintenance. A
strong wooden box can be placed un-
der the engine for added stability.
To service the front wheel
1. Stabilize the rear of the motorcycle
EC000108
2. Raise the front wheel off the
6-33
by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.
ground by using a motorcycle
stand.
EAU01579