Speedometer Unit; Handlebar Switches - Yamaha V-Star XVS1100AWR Owner's Manual

Hide thumbs Also See for V-Star XVS1100AWR:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
3
1. "TRIP" button
2. Odometer/trip meter

Speedometer unit

The speedometer unit is equipped with
a digital odometer and a tripmeter. The
speedometer shows riding speed. The
odometer shows the total distance trav-
eled. The tripmeter shows the distance
traveled since it was last set to zero.
Pushing the "TRIP" button switches the
display between the odometer mode
"ODO" and the tripmeter mode "TRIP".
To reset the tripmeter, select it by
EAU03193
pushing the "TRIP" button, and then
push the "TRIP" button again and hold
it down for at least one second. The
tripmeter can be used to estimate the
distance that can be traveled with a full
tank of fuel. This information will enable
you to plan future fuel stops.
NOTE:
_
This motorcycle is not equipped with a
tachometer; however, it has a built-in
speed limiter, which prevents the en-
gine speed from exceeding approxi-
mately 6,800 r/min and the vehicle
speed from exceeding approximately
175 km/h (110 mi/h).
_
1. Dimmer switch "
2. Horn switch "
3. Turn signal switch "

Handlebar switches

Dimmer switch "
Set this switch to "
beam and to "
Horn switch "
Press this switch to sound the horn.
3-3
/
"
"
/
"
EAU00118
EAU03888
/
"
" for the high
" for the low beam.
EAU00129
"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xvs1100atcXvs1100awcV-star xvs1100atr

Table of Contents