Adjusting The Shock Absorber Assembly - Yamaha V-Star XVS1100AWR Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the shock absorber
assembly
The shock absorber assembly is locat-
ed under the rider seat and is equipped
with a spring preload adjusting ring.
CAUTION:
3
_
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
_
Adjust the spring preload as follows.
1. Remove the rider seat. (See
page 3-10 for rider seat removal
and installation procedures.)
EAU03194
EC000015
1. Quick fastener (× 3)
2. Remove each quick fastener from
the ignitor unit panel by pushing
the center in with a screwdriver,
then pulling the fastener out.
1. Ignitor unit panel
3. Pull the ignitor unit panel out to the
3-13
right.