Download Print this page

Filling With Salt - Westinghouse SI 910 SA Care And Use Manual

Hide thumbs


Filling with salt

Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically
designed for use in dishwasher, specially
table salt, will damage the water softener.
Only fill with salt just before starting one
of the complete washing programmes (not
the Rinse and Hold programme). This will
prevent any grains of salt or salty water,
which may have been spilled, remaining
on the bottom of the machine for any
period of time, which may cause
To fill:
1. To fill with salt, unscrew the cap of the salt
2. Pour 1 litre of water inside the container,
(this is necessary only before filling with
salt for the first time).
3. Then using the funnel provided, pour in the salt
until the container is full.
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the
5. Screw on the cap tightly.
The salt container will require topping up
The salt cap has a refill indicator window in the
A green floater is clearly visible when there is salt
inside the container, and almost disappears when
the salt has finished, reminding you to add salt.