Table of Contents
Advertisement
Admin Settings
Local Network
•
IP Address: (Default 192.168.15.1.) The Internet Protocol (IP) address of
your IP 8100-2/8100-3 is private and cannot be seen on the Internet. You
can change this number if needed, but it is usually not necessary to do so.
Subnet Mask: (Default 255.255.255.0.) The subnet mask (subnetwork mask)
•
is used to define a list of IP addresses allowed to a specified network segment
(i.e., the 192.168.15.x subnet).
Local Domain Name (optional): If desired, you can enter a name here to
•
identify your network.
Deny WAN Ping: This option allows the IP 8100-2/8100-3's public WAN IP to
ignore ping commands sent by Internet users. Hackers may ping public WAN
IP address to determine whether an IP address is vulnerable. When defaults
to Deny, this option instructs your network to ignore Ping queries and to help
protect against unauthorized access by others outside your network.
VPN Pass-Through: (Default On) The IP 8100-2/8100-3 supports VPN (Virtual
Private Network) pass-through for both PPTP (Point-to-Point Tunneling Proto-
col) and IPSec (IP Security). Turning both of these On prevents your IP 8100-
2/8100-3 from blocking access to another network you may wish to use.
Universal Plug and Play
•
Default is On. This option makes the IP 8100-2/8100-3 compliant with the
Universal Plug and Play standard, which allows compatibility with equipment
made by different manufacturers.
Remote Web Management
Default is off. If turned on, this feature allows you to change IP 8100-2/8100-3
settings from a remote location (i.e., via the Internet).
IP Address: Enter the Internet IP address of a computer that has access to
•
the IP 8100-2/8100-3. You can use 0.0.0.0 to allow all Internet IP addresses
access to your network.
•
Port: Enter the port number used for access to the IP 8100-2/8100-3.
Example: http://x.x.x.x:8080 (Where x.x.x.x is the WAN IP address of the IP
8100-2/8100-3 and 8080 is the port used for the web management interface.)
Remote SSH Management
If turned on, this feature allows Vonage to remotely troubleshoot the IP 8100-
2/8100-3 via a secure shell (SSH). This feature is protected with an Admin
password granted to Vonage support staff only.
IP Address: Enter the Internet IP address of the remote computer, which will
•
be allowed access to remotely configure the IP 8100-2/8100-3.
Click Apply to save the page settings. Clicking Cancel aborts any changes you
have made on the page.
DHCP Screen
This screen allows you to view or change your local network IP settings.
When any device on your network is turned on, it must be assigned an IP ad-
dress to communicate with other devices on the network. DHCP (Dynamic Host
Configuration Protocol) assigns these IP addresses to devices on your network.
31
Advertisement
Table of Contents
