VTech USB 7100 Manual page 31

Appendix
In case of difficulty
Manual handset
registration
Lost or broken
handsets
Only one call will
ring at a time
NOTE: The term "base" above refers to the telephone base, not the charger provided with expansion handsets.
If the error message "Not Registered" is displayed, return the handset to the
base. After 60 seconds the handset should beep to indicate that
registration is completed.
If registration fails, follow the steps below to deregister and reregister your
handset:
1 Select MENU.
V
until "Registration" is displayed, then select OK.
2 Press
V
until "Deregister" is highlighted, then select OK.
3 Press
V
until affected handset is highlighted, then select OK.
4 Press
5 At the "Deregister?" confirmation prompt, select OK.
6 Press and hold the LOCATE HANDSET button on the base for at least 5
seconds.
7 Select MENU.
V
until "Registration" is highlighted, then select OK.
8 Press
9 Select OK to display "Search Base," then wait a few seconds. If registra-
tion is successful, you will be prompted to enter a handset name.
If the "Not Registered" message is still displayed, call VTech Customer
Support at the numbers listed on page 26.
If you have lost or broken a handset, you should de-register it from the
base. Using a handset that is registered to the base, follow the steps below
to de-register the lost or broken handset:
1 Select MENU.
V
until "Registration" is displayed, then select OK.
2 Press
V
until "Deregister" is highlighted, then select OK.
3 Press
V
until affected handset is highlighted, then select OK.
4 Press
5 At the "Deregister?" confirmation prompt, select OK.
Once that handset has been de-registered, you may attempt to register the
new handset.
The USB7100 can only ring for one incoming call at a time (Skype, stan-
dard, or intercom). If you receive a second call before answering the first
call, you will not be notified of the second call until after the first call is
answered. However, if you receive an incoming call while calling ALL hand-
sets (select * from the INTERCM menu), the incoming call will take priority
over the intercom call.
29