Getting Started Quick reference guide Handset Press to scroll down in menus. While entering names or numbers, press to move the cursor to the left. SOFTKEY Press a softkey to select an option SOFTKEY SOFTKEY displayed just above the key. Press to display Caller ID log.
Getting Started Before you begin Internet calling About Caller Identification To make and receive Internet calls, Caller ID with Call Waiting features you must use the enclosed CD-ROM let you see who’s calling before you to install the required software on to answer the phone, even when your computer (see page 9).
Getting Started Wall mounting The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Connect cords as shown on page 5, then press and slide down firmly so base is held securely on outlet mounting pegs Plug line cord into telephone jack...
Getting Started Software installation & use To make and receive Internet calls, you must install onto your computer Vtech™ and Skype™ software. Use the CD-ROM included with your telephone to down- load and install the latest version of software.
Page 7
NOTE: The telephone will be reprogrammed automatically if the firmware does not match the Phone Suite software version. Keep the handset in the telephone base until programming is completed. Dialing options (do not change unless directed to do so by a Vtech Customer Care representative). Skype ™...
Telephone Operation Type of call Elapsed time Basic operation IN USE 01:23 Making and answering calls INTERCM MUTE To answer a call, press the flashing Auto Answer is activated, the call will be answered when you lift the handset from the base (see page 16). To make calls: •...
Telephone Operation Intercom and call transfers VTECH INTERCM MENU Some features described on this page are available only if you have purchased and registered optional expansion handsets (see page 25). Paging and intercom calls The intercom allows you to communicate with 2 >...
Page 10
Telephone Operation Handset settings 3 Auto answer 3 > AUTO ANSWER When on, incoming calls will be answered automati- 4 LANGUAGE cally when you lift the handset from the base. Select to toggle Auto Answer on or off (a checkmark appears when on).
If all memory locations are in use, an error message will be displayed. You will not be able to store a new number until you delete an existing one. Phonebook VTECH New phonebook entries INTERCM MENU To create a new phonebook entry...
Page 12
Phonebook Phonebook search VTECH INTERCM MENU Press the PHONEBOOK display the first entry in the phonebook. You can then press to browse through the phone- book (see below to search by name). Press any time to exit the directory. Phonebook button...
Calls received by all handsets are stored in a shared call log that can store 50 entries. You can review the log to find out who has called, return the call with- VTECH out dialing, or copy the caller’s name and number 34 CALLS / 1 NEW into your phonebook.
Appendix Screen icons and indicator lights Handset screen icons Telephone line Internet line MUTE NEW Intercom Low battery (place handset in base or charger to recharge) Dial pad locked (to unlock, select MENU then press Microphone is muted (select MUTE to resume conversation) MUTE New calls (press CID to review call log) Status symbols for Internet calls...
• Launch your browser and check to see if you can connect to the Internet. You must establish an Internet connection to make calls. • Activate your Vtech Cordless Phone Suite software, click on the Status tab, and make sure all four boxes are checked. Unchecked boxes may help you identify the source of the problem.
Page 16
9 Select OK to display “Search Base,” then wait a few seconds. If reg- istration is successful, you will be prompted to enter a handset name. If the “Not Registered” message is still displayed, call VTech Customer Support at the numbers listed on page 26.
Appendix Care and maintenance Your cordless telephone contains sensitive electronic parts, so it must be treated with care. Avoid rough treatment: Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water: Your telephone can be damaged if it gets wet.
Appendix Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning.
What must you return with the Product to get warranty service? • In no event shall VTECH be liable for any indirect, special, incidental, consequential, 1 Return the entire original package and or similar damages (including, but not lim-...
Attachments (ACTA). We are required to pro- SERVICE at 1-888-347-2005. In Canada, call vide you with the following information. VTech Telecommunications Canada Ltd. at 1- 1. Product identifier and REN information 800-267-7377 for repair/warranty information. The telephone company may ask you to dis-...
Appendix FCC, ACTA and IC regulations IC (Industry Canada) Repairs to certified equipment should be made by an authorized Canadian mainte- This telephone is registered for use in nance facility designated by the Supplier. Any Canada. repairs or alterations made by the user to this equipment, or equipment malfunctions, may The term “IC:”...
Appendix Index Low battery, 7 AC adapter, 5 Adding new handsets, 25 Making calls, 12, 21 Answering calls, 12 Mute, 13 Auto answer, 16 Names, Battery charging, 7 enter into phonebook, 19 Battery installation, 7 search for, 20 Belt clip, 8 Net status, 17 Call logs, 22 Operating range, 39...