VTech USB 7100 Manual page 29

Appendix
In case of difficulty
Handset displays
"No VoIP Clients
Running"
No audio on
Internet calls
Problems using
SkypeOut
Problems check-
ing Net Status on
handset
Problems with
conference calls
using the handset
Caller ID log
always displays 1
CALL / 1 NEW
NOTE: The term "base" above refers to the telephone base, not the charger provided with expansion handsets.
Launch your Skype ™
• Click Tools > Options > Privacy Menu > Related Tasks.
• Click Manage other programs' access to Skype.
• Select Vtech, then click the Change button.
• Click Allow this program to access Skype, then click OK.
Launch your Skype ™
• Click Tools > Options > Sound Devices Menu.
• Set "Audio In" to Cordless USB Phone.
• Set "Audio Out" to Cordless USB Phone.
• Set "Ringing" to Cordless USB Phone, then click OK.
You may enter numbers at the computer or the handset. To use the hand-
set, choose one of the methods listed below:
• Enter "00" + "Country code" + "National prefix (if needed)" + (number)
• Enter "011" + "Country code" + "National prefix (if needed)" + (number)
• Launch the Vtech Cordless Phone Suite software, click the Options tab,
then check the box marked Add international prefix and
country code. Then enter "National prefix (if needed)" + (number).
Check your Net Status when you first enter the menu (before scrolling).
When you scroll, the highlight character (>) will follow your selection, no
longer indicating your current Net Status.
You can also launch the Skype
Status (click on the icon in the bottom left corner of the screen).
You must use Skype
LIST/CALL button to join the call using the cordless handset.
The phone cannot keep track of the number of received calls if you do not
subscribe to Caller ID. No matter how many incoming calls are received,
the phone will display 1 CALL / 1 NEW.
software and follow the steps below:
software and follow the steps below:
™ software to review or change your Net
™ to start the conference call, then quickly press the
27